Add to Chrome
Add to Firefox
Add to EdgeBaoyun Wang
Near-field Localization with Dynamic Metasurface Antennas
Oct 28, 2022
Sixth generation (6G) cellular communications are expected to support enhanced wireless localization capabilities. The widespread deployment of large arrays and high-frequency bandwidths give rise to new considerations for localization applications. First, emerging antenna architectures, such as dynamic metasurface antennas (DMAs), are expected to be frequently utilized thanks to the achievable high angular resolution and low hardware complexity. Further, wireless localization is likely to take place in the radiating near-field (Fresnel) region, which provides new degrees of freedom, because of the adoption of arrays with large apertures. While current studies mostly focus on the use of costly fully-digital antenna arrays, in this paper we investigate how DMAs can be applied for near-field localization of a single user. We use a direct positioning estimation method based on curvature-of-arrival of the impinging wavefront to obtain the user location, and characterize the effects of DMA tuning on the estimation accuracy. Next, we propose an algorithm for configuring the DMA to optimize near-field localization, by first tuning the adjustable DMA coefficients to minimize the estimation error using postulated knowledge of the actual user position. Finally, we propose a sub-optimal iterative algorithm that does not rely on such knowledge. Simulation results show that the DMA-based near-field localization accuracy could approach that of fully-digital arrays at lower cost.
Beamforming Design for Integrated Sensing and Wireless Power Transfer Systems
Oct 28, 2022
This letter proposes a new concept of integrated sensing and wireless power transfer (ISWPT), where radar sensing and wireless power transfer functions are integrated into one hardware platform. ISWPT provides several benefits from the integrating operation such as system size, hardware cost, power consumption, and spectrum saving, which is envisioned to facilitate future 6G wireless networks. As the initial study, we aim to characterizing the fundamental trade-off between radar sensing and wireless power transfer, by optimizing transmit beamforming vectors. We first propose a semi-definite relaxation-based approach to solve the corresponding optimization problem globally optimal, and then provide a low-complexity sub-optimal solution. Finally, numerical results verify the effectiveness of our proposed solutions, and also show the trade-off between radar sensing and wireless power transfer.
Cache-Augmented Inbatch Importance Resampling for Training Recommender Retriever
May 30, 2022
Recommender retrievers aim to rapidly retrieve a fraction of items from the entire item corpus when a user query requests, with the representative two-tower model trained with the log softmax loss. For efficiently training recommender retrievers on modern hardwares, inbatch sampling, where the items in the mini-batch are shared as negatives to estimate the softmax function, has attained growing interest. However, existing inbatch sampling based strategies just correct the sampling bias of inbatch items with item frequency, being unable to distinguish the user queries within the mini-batch and still incurring significant bias from the softmax. In this paper, we propose a Cache-Augmented Inbatch Importance Resampling (XIR) for training recommender retrievers, which not only offers different negatives to user queries with inbatch items, but also adaptively achieves a more accurate estimation of the softmax distribution. Specifically, XIR resamples items for the given mini-batch training pairs based on certain probabilities, where a cache with more frequently sampled items is adopted to augment the candidate item set, with the purpose of reusing the historical informative samples. XIR enables to sample query-dependent negatives based on inbatch items and to capture dynamic changes of model training, which leads to a better approximation of the softmax and further contributes to better convergence. Finally, we conduct experiments to validate the superior performance of the proposed XIR compared with competitive approaches.
Graph Neural Network-Based Scheduling for Multi-UAV-Enabled Communications in D2D Networks
Feb 15, 2022
In this paper, we jointly design the power control and position dispatch for Multi-unmanned aerial vehicle (UAV)-enabled communication in device-to-device (D2D) networks. Our objective is to maximize the total transmission rate of downlink users (DUs). Meanwhile, the quality of service (QoS) of all D2D users must be satisfied. We comprehensively considered the interference among D2D communications and downlink transmissions. The original problem is strongly non-convex, which requires high computational complexity for traditional optimization methods. And to make matters worse, the results are not necessarily globally optimal. In this paper, we propose a novel graph neural networks (GNN) based approach that can map the considered system into a specific graph structure and achieve the optimal solution in a low complexity manner. Particularly, we first construct a GNN-based model for the proposed network, in which the transmission links and interference links are formulated as vertexes and edges, respectively. Then, by taking the channel state information and the coordinates of ground users as the inputs, as well as the location of UAVs and the transmission power of all transmitters as outputs, we obtain the mapping from inputs to outputs through training the parameters of GNN. Simulation results verified that the way to maximize the total transmission rate of DUs can be extracted effectively via the training on samples. Moreover, it also shows that the performance of proposed GNN-based method is better than that of traditional means.
Jointly Learned Symbol Detection and Signal Reflection in RIS-Aided Multi-user MIMO Systems
Feb 14, 2022
Reconfigurable Intelligent Surfaces (RISs) are regarded as a key technology for future wireless communications, enabling programmable radio propagation environments. However, the passive reflecting feature of RISs induces notable challenges on channel estimation, making coherent symbol detection a challenging task. In this paper, we consider the uplink of RIS-aided multi-user Multiple-Input Multiple-Output (MIMO) systems and propose a Machine Learning (ML) approach to jointly design the multi-antenna receiver and configure the RIS reflection coefficients, which does not require explicit full knowledge of the channel input-output relationship. Our approach devises a ML-based receiver, while the configurations of the RIS reflection patterns affecting the underlying propagation channel are treated as hyperparameters. Based on this system design formulation, we propose a Bayesian ML framework for optimizing the RIS hyperparameters, according to which the transmitted pilots are directly used to jointly tune the RIS and the multi-antenna receiver. Our simulation results demonstrate the capability of the proposed approach to provide reliable communications in non-linear channel conditions corrupted by Gaussian noise.
Unmanned Aerial Vehicle Swarm-Enabled Edge Computing: Potentials, Promising Technologies, and Challenges
Jan 21, 2022
Unmanned aerial vehicle (UAV) swarm enabled edge computing is envisioned to be promising in the sixth generation wireless communication networks due to their wide application sensories and flexible deployment. However, most of the existing works focus on edge computing enabled by a single or a small scale UAVs, which are very different from UAV swarm-enabled edge computing. In order to facilitate the practical applications of UAV swarm-enabled edge computing, the state of the art research is presented in this article. The potential applications, architectures and implementation considerations are illustrated. Moreover, the promising enabling technologies for UAV swarm-enabled edge computing are discussed. Furthermore, we outline challenges and open issues in order to shed light on the future research directions.
Task-Based Graph Signal Compression
Oct 24, 2021
Graph signals arise in various applications, ranging from sensor networks to social media data. The high-dimensional nature of these signals implies that they often need to be compressed in order to be stored and transmitted. The common framework for graph signal compression is based on sampling, resulting in a set of continuous-amplitude samples, which in turn have to be quantized into a finite bit representation. In this work we study the joint design of graph signal sampling along with quantization, for graph signal compression. We focus on bandlimited graph signals, and show that the compression problem can be represented as a task-based quantization setup, in which the task is to recover the spectrum of the signal. Based on this equivalence, we propose a joint design of the sampling and recovery mechanisms for a fixed quantization mapping, and present an iterative algorithm for dividing the available bit budget among the discretized samples. Furthermore, we show how the proposed approach can be realized using graph filters combining elements corresponding the neighbouring nodes of the graph, thus facilitating distributed implementation at reduced complexity. Our numerical evaluations on both synthetic and real world data shows that the joint sampling and quantization method yields a compact finite bit representation of high-dimensional graph signals, which allows reconstruction of the original signal with accuracy within a small gap of that achievable with infinite resolution quantizers.