Add to Chrome
Add to Firefox
Add to EdgeMatteo Nerini
Wideband Modeling and Beamforming for Beyond Diagonal Reconfigurable Intelligent Surfaces
Mar 19, 2024
This work studies the wideband modeling and beamforming design of beyond diagonal reconfigurable intelligent surface (BD-RIS), which generalizes and goes beyond conventional RIS with diagonal phase shift matrices to achieve enhanced channel gain. Specifically, we investigate the response of BD-RIS in wideband systems by going back to its hardware circuit realizations. We propose a novel wideband model which has simple expressions while capturing the response variations of BD-RIS for signals with different frequencies. With this wideband model, we propose a BD-RIS design algorithm for an orthogonal frequency division multiplexing system to maximize the average rate over all subcarriers. Finally, we provide simulation results to evaluate the performance of the proposed design and show the importance of wideband modeling for BD-RIS.
Static Grouping Strategy Design for Beyond Diagonal Reconfigurable Intelligent Surfaces
Mar 14, 2024
Beyond diagonal reconfigurable intelligent surface (BD-RIS) extends conventional RIS through novel architectures, such as group-connected RIS, with scattering matrix not restricted to being diagonal. However, it remains unexplored how to optimally group the elements in group-connected RISs to maximize the performance while maintaining a low-complexity circuit. In this study, we propose and model BD-RIS with a static grouping strategy optimized based on the channel statistics. After formulating the corresponding problems, we design the grouping in single- and multi-user systems. Numerical results reveal the benefits of grouping optimization, i.e., up to 60% sum rate improvement, especially in highly correlated channels.
Physically Consistent Modeling of Stacked Intelligent Metasurfaces Implemented with Beyond Diagonal RIS
Feb 19, 2024Stacked intelligent metasurface (SIM) has emerged as a technology enabling wave domain beamforming through multiple stacked reconfigurable intelligent surfaces (RISs). SIM has been implemented so far with diagonal RIS (D-RIS), while SIM implemented with beyond diagonal RIS (BD-RIS) remains unexplored. Furthermore, a model of SIM accounting for mutual coupling is not yet available. To fill these gaps, we derive a physically consistent channel model for SIM-aided systems and clarify the assumptions needed to obtain the simplified model used in related works. Using this model, we show that 1-layer SIM implemented with BD-RIS achieves the performance upper bound with limited complexity.
Localized and Distributed Beyond Diagonal Reconfigurable Intelligent Surfaces with Lossy Interconnections: Modeling and Optimization
Feb 08, 2024Reconfigurable intelligent surface (RIS) is a key technology to control the communication environment in future wireless networks. Recently, beyond diagonal RIS (BD-RIS) emerged as a generalization of RIS achieving larger coverage through additional tunable impedance components interconnecting the RIS elements. However, conventional RIS and BD-RIS can effectively serve only users in their proximity, resulting in limited coverage. To overcome this limitation, in this paper, we investigate distributed RIS, whose elements are distributed over a wide region, in opposition to localized RIS commonly considered in the literature. The scaling laws of distributed BD-RIS reveal that it offers significant gains over distributed conventional RIS and localized BD-RIS, enabled by its interconnections allowing signal propagation within the BD-RIS. To assess the practical performance of distributed BD-RIS, we model and optimize BD-RIS with lossy interconnections through transmission line theory. Our model accounts for phase changes and losses over the BD-RIS interconnections arising when the interconnection lengths are not much smaller than the wavelength. Numerical results show that the performance of localized BD-RIS is only slightly impacted by losses, given the short interconnection lengths. Besides, distributed BD-RIS can achieve orders of magnitude of gains over conventional RIS, even in the presence of low losses.
A Universal Framework for Multiport Network Analysis of Reconfigurable Intelligent Surfaces
Nov 17, 2023Reconfigurable intelligent surface (RIS) is an emerging paradigm able to control the propagation environment in wireless systems. Most of the research on RIS has been dedicated to system-level optimization and, with the advent of beyond diagonal RIS (BD-RIS), to RIS architecture design. However, developing general and unified electromagnetic (EM)-compliant models for RIS-aided systems remains an open problem. In this study, we propose a universal framework for the multiport network analysis of RIS-aided systems. With our framework, we model RIS-aided systems and RIS architectures through impedance, admittance, and scattering parameter analysis. Based on these analyses, three equivalent models are derived accounting for the effects of impedance mismatching and mutual coupling. The three models are then simplified by assuming large transmission distances, perfect matching, and no mutual coupling to understand the role of the RIS in the communication model. The derived simplified models are consistent with the model used in related literature, although we show that an additional approximation is commonly considered in the literature. We discuss the benefits of each analysis in characterizing and optimizing the RIS and how to select the most suitable parameters according to the needs. Numerical results provide additional evidence of the equivalence of the three analyses.
Beyond Diagonal Reconfigurable Intelligent Surfaces with Mutual Coupling: Modeling and Optimization
Oct 04, 2023
This work studies the modeling and optimization of beyond diagonal reconfigurable intelligent surface (BD-RIS) aided wireless communication systems in the presence of mutual coupling among the RIS elements. Specifically, we first derive the mutual coupling aware BD-RIS aided communication model using scattering and impedance parameter analysis. Based on the obtained communication model, we propose a general BD-RIS optimization algorithm applicable to different architectures of BD-RIS to maximize the channel gain. Numerical results validate the effectiveness of the proposed design and demonstrate that the larger the mutual coupling the larger the gain offered by BD-RIS over conventional diagonal RIS.
Pareto Frontier for the Performance-Complexity Trade-off in Beyond Diagonal Reconfigurable Intelligent Surfaces
May 31, 2023
Reconfigurable intelligent surface (RIS) is an emerging technology allowing to control the propagation environment in wireless communications. Recently, beyond diagonal RIS (BD-RIS) has been proposed to reach higher performance than conventional RIS, at the expense of higher circuit complexity. Multiple BD-RIS architectures have been developed with the goal of reaching a favorable trade-off between performance and circuit complexity. However, the fundamental limits of this trade-off are still unexplored. In this paper, we fill this gap by deriving the expression of the Pareto frontier for the performance-complexity trade-off in BD-RIS. Additionally, we characterize the optimal BD-RIS architectures reaching this Pareto frontier.
Beyond Diagonal Reconfigurable Intelligent Surfaces Utilizing Graph Theory: Modeling, Architecture Design, and Optimization
May 08, 2023
Recently, beyond diagonal reconfigurable intelligent surface (BD-RIS) has been proposed to generalize conventional RIS. BD-RIS has a scattering matrix that is not restricted to being diagonal and thus brings a performance improvement over conventional RIS. While different BD-RIS architectures have been proposed, it still remains an open problem to develop a systematic approach to design BD-RIS architectures achieving the optimal trade-off between performance and circuit complexity. In this work, we propose novel modeling, architecture design, and optimization for BD-RIS based on graph theory. This graph theoretical modeling allows us to develop two new efficient BD-RIS architectures, denoted as tree-connected and forest-connected RIS. Tree-connected RIS, whose corresponding graph is a tree, is proven to be the least complex BD-RIS architecture able to achieve the performance upper bound in multiple-input single-output (MISO) systems. Besides, forest-connected RIS allows us to strike a balance between performance and complexity, further decreasing the complexity over tree-connected RIS. To optimize tree-connected RIS, we derive a closed-form global optimal solution, while forest-connected RIS is optimized through a low-complexity iterative algorithm. Numerical results confirm that tree-connected (resp. forest-connected) RIS achieves the same performance as fully-connected (resp. group-connected) RIS, while reducing the complexity by up to 16.4 times.
Reconfigurable Intelligent Surfaces 2.0: Beyond Diagonal Phase Shift Matrices
Jan 09, 2023
Reconfigurable intelligent surface (RIS) has been envisioned as a promising technique to enable and enhance future wireless communications due to its potential to engineer the wireless channels in a cost-effective manner. Extensive research attention has been drawn to the use of conventional RIS 1.0 with diagonal phase shift matrices, where each RIS element is connected to its own load to ground but not connected to other elements. However, the simple architecture of RIS 1.0 limits its flexibility of manipulating passive beamforming. To fully exploit the benefits of RIS, in this paper, we introduce RIS 2.0 beyond diagonal phase shift matrices, namely beyond diagonal RIS (BD-RIS). We first explain the modeling of BD-RIS based on the scattering parameter network analysis and classify BD-RIS by the mathematical characteristics of the scattering matrix, supported modes, and architectures. Then, we provide simulations to evaluate the sum-rate performance with different modes/architectures of BD-RIS. We summarize the benefits of BD-RIS in providing high flexibility in wave manipulation, enlarging coverage, facilitating the deployment, and requiring low complexity in resolution bit and element numbers. Inspired by the benefits of BD-RIS, we also discuss potential applications of BD-RIS in various wireless systems. Finally, we list key challenges in modeling, designing, and implementing BD-RIS in practice and point to possible future research directions for BD-RIS.
Optimal Group and Fully Connected Design for Beyond Diagonal Reconfigurable Intelligent Surfaces
Nov 11, 2022
Reconfigurable intelligent surfaces (RISs) allow controlling the propagation environment in wireless networks by tuning multiple reflecting elements. RISs have been traditionally realized through single connected architectures, mathematically characterized by a diagonal scattering matrix. Recently, beyond diagonal RISs (BD-RISs) have been proposed as a novel branch of RISs whose scattering matrix is not limited to be diagonal, which creates new benefits and opportunities for RISs. Efficient BD-RIS architectures have been realized based on group and fully connected reconfigurable impedance networks. However, a closed-form solution for the global optimal scattering matrix of these architectures is not yet available. In this paper, we provide such a closed-form solution proving that the theoretical performance upper bounds can be exactly achieved for any channel realization. We first consider the received signal power maximization in single-user single-input single-output (SISO) systems aided by a BD-RIS working in reflective or transmissive mode. Then, we extend our solution to single-user multiple-input multiple-output (MIMO) and multi-user MIMO systems. We show that our algorithm is less complex than the iterative optimization algorithms employed in the previous literature. The complexity of our algorithm grows linearly (resp. cubically) with the number of RIS elements in the case of group (resp. fully) connected architectures.