Add to Chrome
Add to Firefox
Add to EdgeAutomatic Calibration for an Open-source Magnetic Tactile Sensor
May 28, 2024
Tactile sensing can enable robots to perform complex, contact-rich tasks. Magnetic sensors offer accurate three-axis force measurements while using affordable materials. Calibrating such a sensor involves either manual data collection, or automated procedures with precise mounting of the sensor relative to an actuator. We present an open-source magnetic tactile sensor with an automatic, in situ, gripper-agnostic calibration method, after which the sensor is immediately ready for use. Our goal is to lower the barrier to entry for tactile sensing, fostering collaboration in robotics. Design files and readout code can be found at https://github.com/LowiekVDS/Open-source-Magnetic-Tactile-Sensor}{https://github.com/LowiekVDS/Open-source-Magnetic-Tactile-Sensor.
Seamless Integration of Tactile Sensors for Cobots
Sep 11, 2023The development of tactile sensing is expected to enhance robotic systems in handling complex objects like deformables or reflective materials. However, readily available industrial grippers generally lack tactile feedback, which has led researchers to develop their own tactile sensors, resulting in a wide range of sensor hardware. Reading data from these sensors poses an integration challenge: either external wires must be routed along the robotic arm, or a wireless processing unit has to be fixed to the robot, increasing its size. We have developed a microcontroller-based sensor readout solution that seamlessly integrates with Robotiq grippers. Our Arduino compatible design takes away a major part of the integration complexity of tactile sensors and can serve as a valuable accelerator of research in the field. Design files and installation instructions can be found at https://github.com/RemkoPr/airo-halberd.
Augmenting Off-the-Shelf Grippers with Tactile Sensing
Jun 09, 2023
The development of tactile sensing and its fusion with computer vision is expected to enhance robotic systems in handling complex tasks like deformable object manipulation. However, readily available industrial grippers typically lack tactile feedback, which has led researchers to develop and integrate their own tactile sensors. This has resulted in a wide range of sensor hardware, making it difficult to compare performance between different systems. We highlight the value of accessible open-source sensors and present a set of fingertips specifically designed for fine object manipulation, with readily interpretable data outputs. The fingertips are validated through two difficult tasks: cloth edge tracing and cable tracing. Videos of these demonstrations, as well as design files and readout code can be found at https://github.com/RemkoPr/icra-2023-workshop-tactile-fingertips.