This article delves into advancements in resource allocation techniques tailored for systems utilizing reconfigurable intelligent surfaces (RIS), with a primary focus on achieving low-complexity and resilient solutions. The investigation of low-complexity approaches for RIS holds significant relevance, primarily owing to the intricate characteristics inherent in RIS-based systems and the need of deploying large-scale RIS arrays. Concurrently, the exploration of robust solutions aims to address the issue of hardware impairments occurring at both the transceivers and RIS components in practical RIS-assisted systems. In the realm of both low-complexity and robust resource allocation, this article not only elucidates the fundamental techniques underpinning these methodologies but also offers comprehensive numerical results for illustrative purposes. The necessity of adopting resource allocation strategies that are both low in complexity and resilient is thoroughly established. Ultimately, this article provides prospective research avenues in the domain of low-complexity and robust resource allocation techniques tailored for RIS-assisted systems.
In this paper, we consider the simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS)-assisted THz communications with three-side beam split. Except for the beam split at the base station (BS), we analyze the double-side beam split at the STAR-RIS for the first time. To relieve the double-side beam split effect, we propose a time delayer (TD)-based fully-connected structure at the STAR-RIS. As a further advance, a low-hardware complexity and low-power consumption sub-connected structure is developed, where multiple STAR-RIS elements share one TD. Meanwhile, considering the practical scenario, we investigate a multi-STAR-RIS and multi-user communication system, and a sum rate maximization problem is formulated by jointly optimizing the hybrid analog/digital beamforming, time delays at the BS as well as the double-layer phase-shift coefficients, time delays and amplitude coefficients at the STAR-RISs. Based on this, we first allocate users for each STAR-RIS, and then derive the analog beamforming, time delays at the BS, and the double-layer phase-shift coefficients, time delays at each STAR-RIS. Next, we develop an alternative optimization algorithm to calculate the digital beamforming at the BS and amplitude coefficients at the STAR-RISs. Finally, the numerical results verify the effectiveness of the proposed schemes.
In this paper, we investigate the reconfigurable intelligent surface (RIS)-aided terahertz (THz) communication system with the sparse radio frequency chains antenna structure at the base station (BS). To overcome the beam split of the BS, different from the conventional single-layer true-time-delay (TTD) scheme, we propose a double-layer TTD scheme that can effectively reduce the number of large-range delay devices, which involve additional insertion loss and amplification circuitry. Next, we analyze the system performance under the proposed double-layer TTD scheme. To relieve the beam split of the RIS, we consider multiple distributed RISs to replace an ultra-large size RIS. Based on this, we formulate an achievable rate maximization problem for the distributed RISs-aided THz communications via jointly optimizing the hybrid analog/digital beamforming, time delays of the double-layer TTD network and reflection coefficients of RISs. Considering the practical hardware limitation, the finite-resolution phase shift, time delay and reflection phase are constrained. To solve the formulated problem, we first design an analog beamforming scheme including optimizing phase shift and time delay based on the RISs' locations. Then, an alternatively optimization algorithm is proposed to obtain the digital beamforming and reflection coefficients based on the minimum mean square error and coordinate update techniques. Finally, simulation results show the effectiveness of the proposed scheme.
Wireless powered mobile edge computing (WP-MEC) has been recognized as a promising solution to enhance the computational capability and sustainable energy supply for low-power wireless devices (WDs). However, when the communication links between the hybrid access point (HAP) and WDs are hostile, the energy transfer efficiency and task offloading rate are compromised. To tackle this problem, we propose to employ multiple intelligent reflecting surfaces (IRSs) to WP-MEC networks. Based on the practical IRS phase shift model, we formulate a total computation rate maximization problem by jointly optimizing downlink/uplink IRSs passive beamforming, downlink energy beamforming and uplink multi-user detection (MUD) vector at HAPs, task offloading power and local computing frequency of WDs, and the time slot allocation. Specifically, we first derive the optimal time allocation for downlink wireless energy transmission (WET) to IRSs and the corresponding energy beamforming. Next, with fixed time allocation for the downlink WET to WDs, the original optimization problem can be divided into two independent subproblems. For the WD charging subproblem, the optimal IRSs passive beamforming is derived by utilizing the successive convex approximation (SCA) method and the penalty-based optimization technique, and for the offloading computing subproblem, we propose a joint optimization framework based on the fractional programming (FP) method. Finally, simulation results validate that our proposed optimization method based on the practical phase shift model can achieve a higher total computation rate compared to the baseline schemes.
In this paper, we investigate an active simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted integrated sensing and communications (ISAC) system, in which a dual-function base station (DFBS) equipped with multiple antennas provides communication services for multiple users with the assistance of an active STARRIS and performs target sensing simultaneously. Through optimizing both the DFBS and STAR-RIS beamforming jointly under different work modes, our purpose is to achieve the maximized communication sum rate, subject to the minimum radar signal-to-noise ratio (SNR) constraint, active STAR-RIS hardware constraints, and total power constraint of DFBS and active STAR-RIS. To solve the non-convex optimization problem formulated, an efficient alternating optimization algorithm is proposed. Specifically, the fractional programming scheme is first leveraged to turn the original problem into a structure with more tractable, and subsequently the transformed problem is decomposed into multiple sub-problems. Next, we develop a derivation method to obtain the closed expression of the radar receiving beamforming, and then the DFBS transmit beamforming is optimized under the radar SNR requirement and total power constraint. After that, the active STAR-RIS reflection and transmission beamforming are optimized by majorization minimiation, complex circle manifold and convex optimization techniques. Finally, the proposed schemes are conducted through numerical simulations to show their benefits and efficiency.
Non-orthogonal multiple access (NOMA) has been viewed as a potential candidate for the upcoming generation of wireless communication systems. Comparing to traditional orthogonal multiple access (OMA), multiplexing users in the same time-frequency resource block can increase the number of served users and improve the efficiency of the systems in terms of spectral efficiency. Nevertheless, from a security view-point, when multiple users are utilizing the same time-frequency resource, there may be concerns regarding keeping information confidential. In this context, physical layer security (PLS) has been introduced as a supplement of protection to conventional encryption techniques by making use of the random nature of wireless transmission media for ensuring communication secrecy. The recent years have seen significant interests in PLS being applied to NOMA networks. Numerous scenarios have been investigated to assess the security of NOMA systems, including when active and passive eavesdroppers are present, as well as when these systems are combined with relay and reconfigurable intelligent surfaces (RIS). Additionally, the security of the ambient backscatter (AmB)-NOMA systems are other issues that have lately drawn a lot of attention. In this paper, a thorough analysis of the PLS-assisted NOMA systems research state-of-the-art is presented. In this regard, we begin by outlining the foundations of NOMA and PLS, respectively. Following that, we discuss the PLS performances for NOMA systems in four categories depending on the type of the eavesdropper, the existence of relay, RIS, and AmB systems in different conditions. Finally, a thorough explanation of the most recent PLS-assisted NOMA systems is given.
Terahertz (THz) and intelligent reflecting surface (IRS) have been regarded as two promising technologies to improve the capacity and coverage for future 6G networks. Generally, IRS is usually equipped with large-scale elements when implemented at THz frequency. In this case, the near-field model and beam squint should be considered. Therefore, in this paper, we investigate the far-field and near-field beam squint problems in THz IRS communications for the first time. The far-field and near-field channel models are constructed based on the different electromagnetic radiation characteristics. Next, we first analyze the far-field beam squint and its effect for the beam gain based on the cascaded base station (BS)-IRS-user channel model, and then the near-field case is studied. To overcome the far-field and near-field beam squint effects, we propose to apply delay adjustable metasurface (DAM) to IRS, and develop a scheme of optimizing the reflecting phase shifts and time delays of IRS elements, which effectively eliminates the beam gain loss caused by beam squint. Finally, simulations are conducted to demonstrate the effectiveness of our proposed schemes in combating the near and far field beam squint.
Reconfigurable intelligent surface (RIS)-aided terahertz (THz) communications have been regarded as a promising candidate for future 6G networks because of its ultra-wide bandwidth and ultra-low power consumption. However, there exists the beam split problem, especially when the base station (BS) or RIS owns the large-scale antennas, which may lead to serious array gain loss. Therefore, in this paper, we investigate the beam split and beamforming design problems in the THz RIS communications. Specifically, we first analyze the beam split effect caused by different RIS sizes, shapes and deployments. On this basis, we apply the fully connected time delayer phase shifter hybrid beamforming architecture at the BS and deploy distributed RISs to cooperatively mitigate the beam split effect. We aim to maximize the achievable sum rate by jointly optimizing the hybrid analog/digital beamforming, time delays at the BS and reflection coefficients at the RISs. To solve the formulated problem, we first design the analog beamforming and time delays based on different RISs physical directions, and then it is transformed into an optimization problem by jointly optimizing the digital beamforming and reflection coefficients. Next, we propose an alternatively iterative optimization algorithm to deal with it. Specifically, for given the reflection coefficients, we propose an iterative algorithm based on the minimum mean square error technique to obtain the digital beamforming. After, we apply LDR and MCQT methods to transform the original problem to a QCQP, which can be solved by ADMM technique to obtain the reflection coefficients. Finally, the digital beamforming and reflection coefficients are obtained via repeating the above processes until convergence. Simulation results verify that the proposed scheme can effectively alleviate the beam split effect and improve the system capacity.
Mobile-edge computing (MEC) is expected to provide low-latency computation service for wireless devices (WDs). However, when WDs are located at cell edge or communication links between base stations (BSs) and WDs are blocked, the offloading latency will be large. To address this issue, we propose an intelligent reflecting surface (IRS)-assisted cell-free MEC system consisting of multiple BSs and IRSs for improving the transmission environment. Consequently, we formulate a min-max latency optimization problem by jointly designing multi-user detection (MUD) matrices, IRSs' reflecting beamforming vectors, WDs' transmit power and edge computing resource, subject to constraints on edge computing capability and IRSs phase shifts. To solve it, an alternating optimization algorithm based on the block coordinate descent (BCD) technique is proposed, in which the original non-convex problem is decoupled into two subproblems for alternately optimizing computing and communication parameters. In particular, we optimize the MUD matrix based on the second-order cone programming (SOCP) technique, and then develop two efficient algorithms to optimize IRSs' reflecting vectors based on the semi-definite relaxation (SDR) and successive convex approximation (SCA) techniques, respectively. Numerical results show that employing IRSs in cell-free MEC systems outperforms conventional MEC systems, resulting in up to about 60% latency reduction can be attained. Moreover, numerical results confirm that our proposed algorithms enjoy a fast convergence, which is beneficial for practical implementation.
In this paper, we investigate the physical layer security in the reconfigurable intelligent surface (RIS)-aided cell-free networks. A maximum weighted sum secrecy rate problem is formulated by jointly optimizing the active beamforming (BF) at the base stations and passive BF at the RISs. To handle this non-trivial problem, we adopt the alternating optimization to decouple the original problem into two sub-ones, which are solved using the semidefinite relaxation and continuous convex approximation theory. To decrease the complexity for obtaining overall channel state information (CSI), we extend the proposed framework to the case that only requires part of the RIS' CSI. This is achieved via deliberately discarding the RIS that has a small contribution to the user's secrecy rate. Based on this, we formulate a mixed integer non-linear programming problem, and the linear conic relaxation is used to obtained the solutions. Finally, the simulation results show that the proposed schemes can obtain a higher secrecy rate than the existing ones.